The Rain-Clik’s Quick Response™ function shuts the system off immediately when it starts to rain.
Most rain sensors have to collect a certain amount of precipitation before a switch is activated that interrupts the irrigation process and shuts down the system. Until then, the system will continue to use water unnecessarily. This is particularly problematic for environmentally conscious users from local authorities, as well as commercial and private users.
The Hunter Rain-Clik and the Wireless Rain-Clik with integrated Quick-Response technology can trigger a shutdown immediately after precipitation starts.
The Rain-Clik can be mounted in the eaves or any smooth, vertical surface such as a wall or fence.
An optional mounting adaptor is available, which enables the Rain-Clik to be conveniently installed on the edge of a gutter.
• Immediate system shutdown via the Quick Response™ function when it starts to rain
• Maintenance-free design with ten-year battery life for Wireless Rain-Clik
• Reset time adjustable via ventilation ring
• Sturdy polycarbonate housing and sturdy metal bracket
• 7.6 m UL-approved cable (0.5 mm², two-core, sheathed) included with Rain-Clik
• Wireless model available with a distance of 244 m between the wireless sensor and the receiver
• Compatible with most control units
• Warranty period: 5 years
• Wiring: normally open or normally closed
• Irrigation system shut-off time: approx. 2 to 5 minutes with Quick Response
• Reset time with Quick Response: approx. 4 hours in dry, sunny conditions
• Reset time when fully soaked: approx. 3 days in dry, sunny conditions
• Switch rated current: 24 VAC, 3 A
• Automatic system shutdown by the frost sensor if the temperature drops below 3°C (Rain/Freeze-Clik model)
• Operating frequency: 433 MHz
• UL-certified, FCC-approved, CE, CUL (CSA), can be used in Australia
• Transmission range up to 244 m line of sight* (wireless model)
• Receiver power supply: 24 VAC (from control unit)
