Prekės kodas: 50023519100
Turimas kiekis: 500
| Atributai | |
| Technical data | Connection cable with crocodile clips, length (m) / (ft): 3 / 10 Connection on suction side: 1” female thread Connection on pressure side: 1” female thread Hydraulic data Pump type: Vane pump, self-priming Flow rate with free outlet up to (l/min) / (gpm): 54 / 14.3 Suction lift max. (m) / (ft): 3 / 10 Delivery pressure max. (bar) / (psi): 1.8 / 26.1 Pumped media: fuel oil and diesel fuels Motor data Insulation class: F Voltage (V): 12 V DC Current consumption (A): 19 Power (W): 230 Fuse (A): 25 A plug-in fuse Duty cycle (min.) with free outlet max.: 180 Running time (min.) with closed nozzle max.: 2 Speed (rpm): 2500 Protection class: IP 54 Materials of parts in contact with media Seals: FKM (Viton®) Pump housing: AlSi 12 (resistant to salt water) Stator: GG 25 POM wing Specifications • Vane pump with integrated bypass • On and off switch • Fuse • Anti-siphon protection according to German Federal Water Act (WHG), always effective • Automatic nozzle with type approval and swivel joint, ZVABD • Delivery hose, 4 m / 13.1 ft, DN 19, 1" male thread, 1" female thread • Suction hose, 1.6 m / 5.2 ft, DN 25, 1" male thread, 1" female thread • Foot valve with strainer • Installation possible without three-digit flow meter NUMERIxx³ Special features • First-class electric machine and pump construction • Continuous operation - 3 hours - with open valve • Lapped shaft seal set • Encapsulation of the electric motor largely prevents condensate water formation, which could cause short circuits in the event of strong temperature fluctuations • Pump housing can be freely positioned in all 90° positions • Switch housing can be freely positioned in all 90° positions • Switch housing made of impact-resistant die-cast zinc coated by means of cataphoresis • Pump housing made of salt water-resistant die-cast aluminium, coated by means of cataphoresis • Motor housing completely galvanised, coated exterior • Narrow tolerances mean that high suction and pressure performance are achieved with maximum efficiency • The vane and stator material combination guarantees dimensional stability of the vane up to 200°C / 392°F • Low weight and extremely long service life due to choice of material |
