1. Pagrindinis
  2. Dalys
  3. Industry & workshop
  4. Consumables and additives
  5. By application
  6. Zinc spray 1

Zinc spray 1

Zinc spray 1

Prekės kodas: 50011001400

Turimas kiekis: 500

€1761 su PVM
Turite klausimų apie šią prekę? Klauskite
Atributai
Box contents 12
Container 400 ml spray can
Technical data Colour: corresponds approximately to RAL 9006
Areas of application: indoors and outdoors
Binder: modified alkyd resin
Pigments: flaky zinc and aluminium pigments
Pigment purity: approx. 99.9 Zn / approx. 99.5% Al
Metal content in the dry film: approx. 70%
Specific weight: 1.0 - 1.2 g/cm³
Recommended primer: zinc spray
Processing temperature: from +5 to +35°C (optimum +18 to +35°C)
Consumption with 1.5 cross-coat approx. 150 ml/m²
Layer thickness with 1.5 cross-coat approx. 30-50 μm
Dust dry after approx. 15 min.
Fully hardened after approx. 12 h
Can be painted after approx. 24 h
Abrasion-resistant
Cross cut DIN 53151 / ISO 2490, cross cut value GT 0 to GT 1
Salt spray test ISO 9227 > 550 h
Mandrel flex test DIN EN ISO 1519 no hairline crack formation
Top coat not required
Temperature resistance after complete hardening approx. -50 to +300°C
Storage stability: 24 months
WEICON special light zinc spray is TÜV-tested and provides all metal surfaces with permanent, cathodic corrosion protection. It is light in colour and provides the same finish as if the surface was hot-dip galvanised. It forms a quick-drying, adhesive, protective layer of micro-fine zinc flakes. The zinc flakes form a highly resistant protective layer, even against extreme weather and environmental influences. WEICON special light zinc spray can be used as a high-quality rust protection primer, for coating welding or drilling points, as a conductive intermediate layer in spot welding, and wherever metal must be protected against corrosion.
Parašyti atsiliepimą
Rašyti
Rašyti
Skambinti